Tubing Connectors and Fittings
Alkali Scientific ASI™ Clear, Easy-Grip, 35 x10mm, Confocal Dish, Adhesion Type, Sterile, Treated (Positive-Charged/ Surface Coated), 50/Cs, 22 x 22 x 0.13mm, Hole 1.33mm, PS/Flux
ASI™ confocal products allow researchers to acquire high resolution microscopic images of cells in 35 mm culture dishes or 6 well plates. Low auto-fluorescence glass and FLux were used, ideal for uses of these products are confocal microscopy, phase contrast microscopy, live cell imaging and micro-manipulations. Surface materials for confocal products:Glass: naturally charged, good growth surface for adherent cellsFLux: surface modified plastic film (188 μm thick), optimal for confocal microscopy Bottom materials: Glass/FLux (no surface treatment for glass bottom) Coverslip: #1.5 Dish color: Clear/Black Dish size: 35 Ø Hole size: 13 Ø / 20 Ø / 25Ø Non – pyrogenic Non – cytotoxic DNase / RNase – free Human DNA – free
Microsolv Technology Corporation Union Peek .010 Hole Complt
Union, Connector Kit, High Pressure, 0.30mm Through Hole with 10-32 Screw Threads. PEEK, Straight Line. Use with 1/16th Tubing. MicroSolv Brand. 1/EA.
AVANTOR MASTERFLEX (VWR LLC) TRI-CLAMP 3/8 HOSE BARB X1-1/2
NC3256853 TRI-CLAMP 3/8 HOSE BARB X1-1/2
Chemglass Life Sciences Flange, Reaction Kettle, 60mm I.D., With O-Ring Groove
Flange, Reaction Kettle, 60mm I.D., With O-Ring Groove. Flange is formed with a groove in the flat portion of the mating surface to accept an O-Ring. The flange also has a ground surface, permitting assembly with either the CG-148 flat flange or CG-149 lid blank using grease. In the greased application, the O-Ring groove prevents grease from entering the reaction kettle and causing possible contamination. Outer taper of flange is formed at a 45º angle to accept the CG-141 clamp.
Chemglass Life Sciences Flange, Reaction Kettle, 150mm I.D., With O-Ring Groove
Flange, Reaction Kettle, 150mm I.D., With O-Ring Groove. Flange is formed with a groove in the flat portion of the mating surface to accept an O-Ring. The flange also has a ground surface, permitting assembly with either the CG-148 flat flange or CG-149 lid blank using grease. In the greased application, the O-Ring groove prevents grease from entering the reaction kettle and causing possible contamination. Outer taper of flange is formed at a 45º angle to accept the CG-141 clamp.
Chemglass Life Sciences O-Ring Joint, 5mm ID, 8mm Tube OD , O-Ring Size: 110, Clamp Size: 12
O-Ring Joint, 5mm ID, 8mm Tube OD , O-Ring Size: 110, Clamp Size: 12. Joint has an o-ring groove to accept the listed o-ring size. Provides for a grease-free, vacuum seal when used with CG-150 clamps. Each joint is supplied with a Viton o-ring of the listed size.
Chemglass Life Sciences Distilling adapter, Double, 24/40 Joint, 6mm PTFE Stopcock, 1/2" Swagelock
Distilling adapter, Double, 24/40 Joint, 6mm PTFE Stopcock, 1/2" Swagelock. Compact and simple distilling adapter for use with Chemglass process reactors. Vapor flows upward freely and distillate is collected in to the small bowl below the joint and through the stopcock into a distilling receiver. Adapter has a lower inner joint and is available with one or two top outer joints. Lower stopcock is either a 6mm or a 10mm PTFE with a 1/2¿ or 3/4¿ OD distillate takeoff for use with a compression fitting and TFE tubing. Adapter is 6¿ overall wide with joints offset 95mm center to center.
Chemglass Life Sciences S-40 Ball Joint, Compatible with Buchi Rotary Evaporators, Tube OD: 34mm
Special S-40 size ball joint compatible with Buchi rotary evaporator components. Both the ball and socket are tooled on Duran 34 mm O.D. x 2.8mm wall tubing.
Chemglass Life Sciences Flange, Compatible with Buchi Rotary Evaporators, Flange OD: 50mm, Flange ID: 34.3mm, Shank OD: 38.1mm
Replacement flange compatible with Buchi condensers and rotary evaporator flasks. Flange OD: 50mm, Flange ID: 34.3mm, Shank OD: 38.1mm.
Chemglass Life Sciences Flange, Compatible with Buchi Rotary Evaporators, Flange OD: 150mm, Flange ID: 119mm, Shank OD: 130mm
Replacement flange compatible with Buchi condensers and rotary evaporator flasks. Flange OD: 150mm, Flange ID: 119mm, Shank OD: 130mm.
World Precision Instrument Female Luer Fitting for 1/8" ID Tubing
- Female Luer Fitting for 1/8" ID Tubing, Polypropylene
- Package of 100
World Precision Instrument Female Luer Fitting for 5/32" ID Tubing
- Female Luer Fitting for 5/32" ID Tubing, Polypropylene
- Package of 100
World Precision Instrument 4-Port Infusion Y Swivel Thread
- 4-Port Infusion Y, Swivel Thread, Polycarbonate & PVC
- Package of 10